Default Credentials (ESXi)

• Related Articles

• Default credentials (Linux)

  Q: I just received a system with a pre-installed Linux operating system. What is the password for logging into the system? A: This will depend on the distribution we installed, as various distributions can carry different default access policies. The ...

• Default IPMI credentials

  Q: What is the default username and password for IPMI?  A: Both the default username and password are “ADMIN”, case-sensitive. You can change this default password after logging in with the default credentials.

• Default IP and Credentials for IPMI

  The JBOD will be set to use the Factory Default of 192.168.1.99 and Default credentials of ADMIN:ADMIN Once you have accessed IPMI, you can use Configuration->Network to set either a STATIC ip address or DHCP.   If you need further information please ...

• Drive failure behavior

  Q: What is the default behavior when a drive fails? A: The default settings for a MegaRAID controller will enforce an automatic rebuild policy, and usually an automatic copyback as well. The automatic rebuild, in the presence of commissioned hot ...

• Install MegaCLi for ESXi

  Download attached MegaCLi zip file: Extract the vib file from the zip and upload to the server. Install using the following: esxcli software vib install -v=/tmp/vmware-esx-MegaCli-8.07.07.vib --force --maintenance-mode --no-sig-check You will need to ...