Install Nexenta-Collector

Install Nexenta-Collector

SSH as root and run:

# !bash
# y
# wget http://www.nexenta.com/nexenta-collector_latest_solaris-i386.deb
# dpkg -i nexenta-collector_latest_solaris-i386.deb
# nexenta-collector --no-upload

Once it’s finished, it’ll display the name and location of the output file.

It should be located in “/var/tmp”, in the format of collector-LICENSE-KEY_appliance-name-date.tar.gz 

    • Related Articles

    • Install Windows Server 2008/2012 over an Existing RAID Array

      How to install Windows Server on an existing RAID array greater than 2TB in size Why is this a problem? When installing Windows on UEFI-based PC's with RAID arrays you must partition your hard drives using GPT. Traditional MBR-type drives are limited ...

    • Standard Upgrade Procedure (Nexenta)

      Check the Release Notes for any special requirements for the upgraded version Verify access to the package repository $setup appliance upgrade -t this is a dry run, that does not make any changes Clean up the device links, on both nodes: nmc$ lunsync ...

    • Install MegaCLi for ESXi

      Download attached MegaCLi zip file: Extract the vib file from the zip and upload to the server. Install using the following: esxcli software vib install -v=/tmp/vmware-esx-MegaCli-8.07.07.vib --force --maintenance-mode --no-sig-check You will need to ...

    • How to Install SuperDoctor on Linux

      Download latest version of SuperDoctor from Supermicro's website: supermicro.com/products/nfo/SMS_SD5.cfm Unzip the archive after it has finished downloading. Locate the SuperDoctor5Installer[...].bin file and rename it to ...

    • Storcli for FreeBSD and Other Operating Systems

      UPDATE (4/28/17): Broadcom acquired Avago since the time of the original publication of this article. To access Storcli and other "LSI" utilities, use the following link and select your product: https://www.broadcom.com/support/download-search ...