Installing Ubuntu Server with the OS on Software Raid 1 and Software Raid 0
Setup Ubuntu 14.04.5 LTS Server with Software Raid1 for OS. (Video)
The attached video will demonstrate a complete Ubuntu 14.04.5 LTS Server setup with the following. Legacy Bios Mode. 240 GB Raid 1 - 2 X 240 GB SSD - OS drive 800 GB Raid 0 - 2 X 400 GB SSD - SCRATCH The video is approximately 6 Minutes and ...
Install Windows Server 2008/2012 over an Existing RAID Array
How to install Windows Server on an existing RAID array greater than 2TB in size Why is this a problem? When installing Windows on UEFI-based PC's with RAID arrays you must partition your hard drives using GPT. Traditional MBR-type drives are limited ...
Installing a GUI on Ubuntu Server 15.04
You have just received your new server running Ubuntu 15.04 and realize that you would now like to have a GUI installed instead of using it through the command line all the time. Here is what you do. 1. Update the server and enter password 2. ...
Installing NVIDIA drivers for Ubuntu 14.04/16.04 with multiple graphics adapters.
Generally the NVIDIA Linux drivers work with most of their cards. Some cases with Tesla's and higher end cards may have slight differences. The cards I'm working with today are the Quadro and Geforce series. FIRST Make sure your primary card is in ...
BIOS Setting for Bootable RAID configurations
When using RAID as an OS Volume, it's important to ensure that all volumes are used for Boot. Certain RAID configurations will require that any drive within the RAID be available as a Boot volume. While UNIX and Windows installers may correctly setup ...