IPMI Drivers for Windows Server

IPMI Drivers for Windows Server

Download Intel IMB driver:


Unzip to C:/temp

Open a Command Prompt:

"Cd C:\temp"

"install.bat" to install the driver.

Then you can use ipmiutil to check the ipmi functions:


    • Related Articles

    • IPMIUtil for Windows

      Download IPMIUtil from SourceForge: http://ipmiutil.sourceforge.net/ Install IPMI Driver:  https://siliconmechanics.zendesk.com/hc/en-us/articles/208826086 Unzip files to any location and run as needed from command line.    ipmiutil - a meta-command ...
    • Install Windows Server 2008/2012 over an Existing RAID Array

      How to install Windows Server on an existing RAID array greater than 2TB in size Why is this a problem? When installing Windows on UEFI-based PC's with RAID arrays you must partition your hard drives using GPT. Traditional MBR-type drives are limited ...
    • Introduction to IPMI

      Q: What is IPMI? A: IPMI stands for Intelligent Platform Management Interface. It is in essence a web server that runs internally on your motherboard, powered by a separate ARM-based chip, also known as the baseboard management controller (BMC). The ...
    • Load IPMI Modules on Linux

      Common Errors: *Not seeing Ipmi information due to no device found. Kernel module may not be loaded. *Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory *Get Device ID command failed *Unable to open SDR ...
    • Default IPMI credentials

      Q: What is the default username and password for IPMI?  A: Both the default username and password are “ADMIN”, case-sensitive. You can change this default password after logging in with the default credentials.