Sparta Performance Gathering Tool

Sparta Performance Gathering Tool

Please download it and run it on your system (whichever are having the issues). For most general purposes, you can run the script and follow the prompts:

# cd /tmp
# wget
# tar -xzvf sparta.tar.gz
# ./

Do not stop the scripts or create an archive of existing statistics when prompted after a short period; please allow them to continue to run. Be sure to note when you experience the undesirable performance so we can correlate the information to our findings.

After an hour (which should include the observed performance issues), please run:

/perflogs/scripts/ stop
/perflogs/scripts/ tarball

    • Related Articles

    • Log gathering with LSIget

      Supported operating systems Linux MacOS VMware FreeBSD Solaris Windows DOS Download location: Instructions: The default command listed on the LSI KB article ...
    • ZeusRAM C023 Firmware Update Instructions

      1. From Nexenta Management Console (NMC) check the status of your pools $ zpool status <pool_name> 2. Find your log device and record the Worldwide SAS ID (WWSID). You will use the Worldwide SAS ID to identify this device later. Write it down. For an ...
    • Disk mapping for failed drives

      How to identify failing drives When monitoring for drive failures in Nexenta and other ZFS-based storage appliances, not all failures will manifest as taking the drive offline completely. If a user or the technician suspects that a failing drive is ...
    • Failed HDD Replacement Instructions

      From Nexenta Management Console (NMC) check the status of your pools $ zpool status Find the faulted HDD and record the worldwide number (WWN) of the HDD, and the name of the pool it resides in. You will use the WWN to identify this HDD later An ...
    • Management Service Restart

      The management interface occasionally gets stuck opening a socket or dbus timeouts. The recommendation is to restart the interface. This will not have any impact on the storage or shares, it just restarts the management interface.   Run the command: ...