Internal: Setting Up Zoho Signature

1.) Click your Avatar Icon in the top right corner.

2.) Click on Preferences

3.) Click the sliding bar to enable signature and click on View Signature to edit.

4.) Click Save

• Related Articles

• BIOS Setting for Bootable RAID configurations

  When using RAID as an OS Volume, it's important to ensure that all volumes are used for Boot. Certain RAID configurations will require that any drive within the RAID be available as a Boot volume. While UNIX and Windows installers may correctly setup ...

• Frequently Asked Questions: Setting Up IPMI

    Frequently Asked Questions: Setting Up IPMI Q: What is IPMI? A: IPMI stands for Intelligent Platform Management Interface. It is in essence a web server that runs internally on your motherboard, powered by a separate chip known as the baseboard ...

• Setting virtual drives as bootable

  Q: I have just created a new RAID configuration, and installed my operating system. However, my system fails to find the boot device on the next reboot. Why is this happening?  A: The LSI controller needs to add a boot flag to the virtual drive ...

• Requesting an RMA via Support@siliconmechanics.com

  Once you have determined that you need to request an RMA for a failed component, please open a case by emailing support@siliconmechanics.com and providing the relevant information according to the template below: Subject: RMA Request for SM<#> ...

• How do I configure networking in Ubuntu 18.04?

  Ubuntu 18.04 has changed from using the interfaces file config to using Netplan https://netplan.io/ This uses YAML based configuration files to configure the network interfaces. Here is an example of the YAML config I created for setting a static IP ...