Power supply models and serials
Q: I have a failed power supply, but I do not know the model and serial. How do I obtain this information?
A: If you have redundant power supplies in your chassis, you can obtain the model and serial by querying the power backplane that manages them.
First, download a copy of IPMICFG, and save it to the local operating system. Then run the following command:
- ipmicfg -pminfo | grep Number
This should show both the model and serial of both of the connected power supplies. If you're not sure which is the failed power supply, run the command again without any options:
The failed power supply will likely report 0's for voltage and current readings, and may also report "[UNIT IS OFF]" under Status. Example:
![](https://desk.zoho.com/DocsDisplay?zgId=660080623&mode=inline&blockId=5gp8k8bcd9f08806e409a987c5e2df668b4d9)
Related Articles
Motherboard model and serial
Q: How do I determine my motherboard model and serial numbers? A: This information is written into DMI into the motherboard. To access it, simply use dmidecode, available on most UNIX and Linux operating systems by default, and available as a ...
LSI controller model and serial
Q: How do I determine my RAID controller model and serial number? A: For LSI MegaRAID series controllers, this information can be obtained using any of LSI's MegaRAID management utilities. If using a LSI SAS HBA, you can use the utilities sas2flash ...
RAM models and serials
Q: I have a failed DIMM, but I do not know the model and serial. How do I obtain this information? A: This information is written into DMI into the motherboard. To access it, simply use dmidecode, available on most UNIX and Linux operating systems by ...
DMI/FRU Imprinting With SUM
******Motherboard must have SUM activated.***** DMI: ./sum –i xxx.xxx.xxx.xxx –u ADMIN –p XXXXXX –c GetDmiInfo --file dmi_info.txt vi dmi_info.txt Under [System] edit Serial Number :wq ./sum –i xxx.xxx.xxx.xxx –u ADMIN –p XXXXXX –c ChangeDmiInfo ...
HDD models and serials
Q: I have a failed hard drive, but I do not know the model and serial. How do I obtain this information? A: If the the component is still visible to your operating system and hard drive controller, you can utilize a number of graphical and command ...